#030 Light Wire Forming Plier (no Groves)

All stainless steel box joint with full hardened tool steel inserts on both round and square beaks are .025"; at the tip. Completely smooth on inside with no grooves. Bending, straightening, and closing can be accomplished by using the flat section in the rear portion of beaks. Designed for use with high tensile wire, up to .020" diameter.

#030 Light Wire Plier (Grooved .010 from tip)

Full hardened tool steel inserts on both round and square beaks, having the same configuration as Orthopli's #030, which is guaranteed not to bend or splay, with the addition of a diamond-honed anvil cutter in the rear portion of the plier beaks. Allows the orthodontist to form, bend and cut the same wire with one instrument, saving time and motion. Designed for forming wire up to .020", and the cutting of wire up to .025", both round and rectangular.

#030-GC-Light Wire Plier w/Cutter (1 Groove at tip)

#032 - Light Wire Forming Plier (2 Grooves at tip)

Having the same basic configuration as Orthopli's #030, with the addition of two grooves at the tip. The first groove is 1mm and the second groove is 2mm from the tip on the square side. There is a larger groove towards the rear of the tip on the 2 flat surfaces allowing for closing loops. Can be used on high tensile wire up to .020" diameter.

#032-G Light Wire Plier (3 Grooves at tip)

#032-C Light Wire Plier (2 Grooves with Cutter)

#032-GC - Light Wire Forming Plier With Cutter (3 Grooves at Tip)

The most popular, high quality, all stainless steel, light wire forming plier with full tool steel inserts, having the same features of Orthopli's   #032 with the addition of an anvil cutter in the rear, and one additional groove at the tip giving you 3 grooves total on the flat side. Designed for forming wire up to .020" and the cutting of wire up to .025"

#030-H - Light Wire Forming Plier with Arch Former (No Grooves)

All stainless steel box joint plier with full hardened tool steel inserts on both round and flat sides of the plier. The round beak is .025 diameter and capable of forming and bending wire up to .020 diameter. Added arch contoured at the rear of the plier allows you to contour a round or rectangular wire up to .025 with the same plier.

#032-H Light Wire Forming Plier w/Arch Former (BEGG, 2 Grooves)

#030-HC - Light Wire Forming Plier With Arch Former and Cutter (No Grooves)

Having the same configuration of #030-H with an added cutter at the rear of the plier. Cleverly designed, this instrument allows the operator   to cut, contour and form wires up to .020 with one plier. The diamond-honed anvil cutter towards the rear of the plier is capable of cutting wire up to .025 diameter.

#032-HC Light Wire Forming Plier w/Arch Form and Cutter (2 Grooves)

#034 - Bird Beak Bending Plier (1/2" Long)

Stubbiness of beaks and rigid tool steel inserts on both round and flat beaks, permits the bending of rectangular wire and round wire, up to .036" diameter. Guaranteed not to splay at the tips. Affords a firm,non-slip grip.

#034-X - Bird Beak Plier (Long) (5/8" Long)

Having the same characteristics of our #034 and the beak is longer by 1/8" giving the operator a more gradually tapered beak. Constructed from a stainless steel forging and tool steel inserted tips. Form round or rectangular wire up to .036".

#034-XC - Bird Beak Plier (Long With Cutter)

#034-H - Bird Beak Plier with Arch Former

The round beak is .035 in diameter and capable of forming and bending wire up to .036 diameter. Added arch contoured at the rear of the plier allows you to contour a round or rectangular wire up to .036 with the same plier.

#034-HC - Bird Beak/Former/Cutter

Having the same configuration of the #034-H except we have added a diamond-honed anvil cutter at the rear of the instrument. It can be used for forming and cutting round and rectangular wires up to .036 diameter.

#036 - Bird Beak Plier With Serrations

With the added feature of a fully serrated square beak and closing groove, ORTHOPLI'S #036 Bird Beak plier affords a firm non-slip grip on any wire up to .036". All stainless steel with tool steel inserts. Guaranteed not to splay at the tips.

#042 Tweed Loop and Helix Forming Plier

Precisely finished, full tool steel inserts on both cylindrical and concave beaks, featuring two straight cylindrical sections on top beak. Front cylindrical section being of .045" diameter, and second cylindrical section being of .065" diameter. Lower concave beak permits uniform forming and assures a non-slip grip. Added feature of utility groove in the rear portion of beaks permits the closing of formed loops.

#043 - Tweed Loop and Helix Forming Plier

All tool steel inserts. Front cylinder .045" diameter, middle cylinder .060" diameter, and the rear cylinder .075&" diameter. with the feature of the lower concave beak and the precision ground cylindrical sections. Added feature of utility groove in the rear portion of beaks, permits closing of loops - for use in rectangular wire up to .025" with one instrument. Lower flat beak is finely serrated for firmer grip

#043-CK - Tweed Loop and Helix Forming Plier

Precision ground inserted tips having three cylindrical sections. front cylinder being of .045", middle cylinder being of .060" diameter and the rear cylinder being of .075" diameter. Lower beak being newly designed with front parallel section line. Lower flat beak is finely serrated for firmer grip, incorporating the modern design of an anvil wire cutter in the rear portion of the beak, which permits the orthodontist to bend and cut both round and rectangular wire up to .025" saving time and motion.

#044 - Optical Plier

Finely finished round and concave beaks, both of hardened steel tool inserts. Excellent for bending of round and edge-wise, affording firm grip, without nicking wire. Can be used for loop tip back and gable bends.

#044-G Optical Plier (Modified)

Excellent multipurpose instrument which is constructed with a stainless steel forging and tool steel inserted tips. The instrument can be utilized and a small three prong plier, optical plier and a tweed plier. Designed to make inter-oral adjustments, gable bends and form loops on both round and rectangular wire up to .028. The round single barrel side measures .035" diameter and fits into a lower concave groove. Design assistance by Dr. Saul N. Greenberg.

#050 Auxillary Spring Forming Plier

The unique design of this plier is for forming Brousard® auxiliary spring components on .012", .014" or .016" round wire, with minimum operator time and effort. The #050 auxiliary spring bending plier fabricates auxiliary spring components used in the Brousard® “two-force technique” with accuracy and uniformity. Full tool steel inserts.

#052 Jarabak Plier

Handcrafted for the precise bending of light wires. Three precision grooves insure uniform and accurate bending and closing of loops. Full tool steel inserts on both beaks are guaranteed not to splay, with the addition of fine serrations on the square beak affords an unusually firm grip.

#052-C - Jarabak Plier with Cutter

One side of the tip is flat and serratted while the opposing side has a .030" diaround beak for forming, bending and helixes. For your convenience we placed an anvil cutter at the rear portion of the plier tip. This instrument is capable of bending and cutting wire up to .025 dia.

#065 - Hawley Retainer Forming Plier

Form Hawley Retainers on heavy wire with the use of one instrument automatically. Front portion of upper beak constructed similar to bird beak plier. Second portion of upper beak constructed similar to loop forming plier 3mm. dia., and the third portion of the upper beak constructed similar to an arch contouring plier.

#063-P Arch Forming Plier (No Grooves)

Greatly used in forming and contouring rectangular arch wire without torquing. Also ideal for contouring round wire. Full tool steel inserted beaks are precisely machined to accept up to .040" rectangular or round wire. A real time saver.

#034-S - Adams Plier (Square Beaks .045")

Stubbiness of beaks and rigid tool steel inserts with both beaks being squae at the tip and parallel at 1mm. opening assures the ease of bending and forming heavy wire up to .060". Tool steel beak affords firm, non-slip grip.

#031 - Light Wire Plier (2 Rounds)

The unique design permits forming on either beak. Precision ground round beaks of hardened tool steel inserts, .025" diameter at the tips affording an unusually firm grip on wire. Designed for forming wire up to .020"

#051 - Inter Maxillary Hook Forming Plier

Inter maxillary hook forming plier bends, hooks and helixes. Both full tool steel inserts are precision-grooved, assuring operator of accurate repeatability of the same size with minimum effort and insuring longer service. Instructions included.