{"title":"Lab Instruments","description":"\u003cp\u003eHeavy wire bending of stainless-steel lab wires requires a strong beak. Many lab instruments are manufactured by Orthopli with a hardened insert at the tip of the instrument. This will eliminate slippage during use and able to be grounded down to their finest point.\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"bird-beak-bending-plier-1-2-long","title":"Bird Beak Bending Plier (1\/2\" long)","description":"\u003cp\u003eOrthopli's most popular bird beak bending instrument, measuring ½ inch in length and .036\" at the tip on both the round and square sides. The short stubby beak offers strength during bending. Recommended for wire up to .036\" (Example: retainer adjustment or retainer forming) Hardened steel inserted beaks will help eliminate slippage when forming or bending wire and also makes it a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures ½\" in length and the round portion of the beak is round the whole ½\" offering many helix sizes when bending.\u003c\/li\u003e\n\u003cli\u003eBend and form all archwire round and rectangular along with retainer wire up to .036\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended for retainer adjustment cassettes when setting up tray set-ups\u003c\/p\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644572380,"sku":"034","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-1.jpg?v=1769038449"},{"product_id":"bird-beak-bending-plier-with-cutter-1-2-long","title":"Bird Beak Bending Plier with Cutter (1\/2\" Long)","description":"\u003cp\u003eThis bird beak features the most up to date built in anvil cutter, in the rear portion of the beaks. The operator can bend and cut with the same plier, using one instrument, saving time and motion. (Example: Bend or adjust a retainer and cut off extended ends all with one instrument)The instrument is capable of cutting and forming wire up to .O36\". Hardened steel inserted beaks are placed at the tip to help eliminate slippage when forming or bending wire which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built in wire cutter capable of cutting all archwire and retainer wire up to .O36\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures ½\" in length and the round beak is excellent for bending many loop sizes. \u003c\/li\u003e\n\u003cli\u003eBend and form all archwire round and rectangular along with retainer wire up to .O36\" \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003cli\u003eRecommended for retainer adjustment cassettes when setting up for tray set-ups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644670684,"sku":"034-C","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-C-1.jpg?v=1769032441"},{"product_id":"bird-beak-bending-plier-long-5-8-length","title":"Bird Beak Bending Plier Long (5\/8\" length)","description":"\u003cp\u003eDue to its design this multipurpose bird beak is excellent for both chairside and retainer adjustments.  The added length to this bird beak offers the operator a more gradual tapered beak. Both round and square beaks measure .O36\" and is recommended for bending wire up to .O36\" round or rectangular wire. (Example: Retainer adjustment or retainer forming) Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cp\u003e     \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeaks measure 5\/8\" in length and round beak is gradually tapered the whole length. \u003c\/li\u003e\n\u003cli\u003eOffers a small beak for chairside along with strength at the rear for heavier wire bending up to .O36\" (Retainer adjustment).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round beak is excellent for bending many loop sizes. \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003cli\u003eRecommended for retainer adjustment cassettes when setting up for Tray set-ups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644703452,"sku":"034-X","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-X-1.jpg?v=1769032445"},{"product_id":"bird-beak-bending-plier-long-with-cutter-5-8-length","title":"Bird Beak Bending Plier Long with Cutter (5\/8” length)","description":"\u003cp\u003eOrthopli's multipurpose bird beak is manufactured with built in cutter at the rear of the beaks along with the long tapered beak for excellent chair side and retainer adjustment. The operator will be capable of bending, adjusting and cutting all round and rectangular arch wire with one instrument. Recommended to form and cut retainer wire up to .O36\" all with one instrument. Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeak measures 5\/8\" long on both the round and square side along with an anvil cutter in the rear portion of the beaks.\u003c\/li\u003e\n\u003cli\u003eThe extended beaks are gradually tapered to the cutter making this instrument excellent for both chair side and retainer adjustment.\u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak is round the whole 5\/8\" offering many helix sixes when bending.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644736220,"sku":"034-XC","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-XC-3.jpg?v=1769032449"},{"product_id":"bird-beak-bending-plier-with-arch-former","title":"Bird Beak Bending Plier with Arch Former","description":"\u003cp\u003eCleverly designed, this combination instrument is two instruments into one. As a manufacture, Orthopli Corporation is able to combine a bird beak bending instrument along with an arch former creating one unique plier. This combination allows the operator to form or bend arch wire and retainer wire at the tip and then create or modify the arch form with the built in arch contouring portion at the base of the instrument. Being able to perform 2-steps with one instrument is a time saver and cost savings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beak measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular) and lab wire up to .O36\". \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak is round the whole 5\/8\" offering many helix sixes when bending.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003cli\u003eRecommended for retainer adjustment cassettes when doing tray set-ups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644768988,"sku":"034-H","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-H-1.jpg?v=1769032454"},{"product_id":"bird-beak-bending-plier-with-arch-former-and-cutter","title":"Bird Beak Bending Plier with Arch Former and Cutter","description":"\u003cp\u003eThis instrument will allow the operator to bend, form loops, contour an arch, cut retainer wire and arch wire with just one instrument. Orthopli has once again designed this complex instrument creating another multipurpose combination plier. This instrument is manufactured with a bird beak style bending beak along with an arch former located at the rear of the tip and an added built in cutter is placed in the middle. Combining these three features into 1-multipurpose plier saves both time and money.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular) and lab wire up to .036\". \u003c\/li\u003e\n\u003cli\u003eTowards the middle of the tip is a built in cutter capable of cutting all arch wire and retainer wire up to .036\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak is round the whole 5\/8\" offering many helix sizes when bending.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eBend and form all arch wire round and rectangular along with retainer wire up to .036\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644834524,"sku":"034-HC","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-HC-1.jpg?v=1769032458"},{"product_id":"adams-plier-square-beak-medium-large","title":"Adams Plier (Square Beak- Medium\/Large)","description":"\u003cp\u003eConstructed on a medium plier handle that is slightly larger than the standard instrument. This double square beak instrument is capable of bending wire up to .045\" dia. Both beaks are manufactured with a hardened insert at the tip to help eliminate slippage during use. Hardened inserts also help extend the life of the instrument. When the instrument is open at 1mm both beaks are parallel to help eliminate slippage when bending a heavy wire. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth beaks are square at the tip and measure .045\" square. \u003c\/li\u003e\n\u003cli\u003eBeaks are manufactured with hardened inserts. \u003c\/li\u003e\n\u003cli\u003eHardened inserts help eliminate slippage during use and increase the life of the instrument.\u003c\/li\u003e\n\u003cli\u003eRecommended to adjust and bend wire up to .050\" dia. \u003c\/li\u003e\n\u003cli\u003eBeaks open parallel at 1mm that will help eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eManufactured on a medium\/large plier that will help bend heavy wire with little effort.   \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478645391580,"sku":"034-S","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-S-1.jpg?v=1769032462"},{"product_id":"bird-beak-plier-with-serrations","title":"Bird Beak Plier with Serrations","description":"\u003cp\u003eMeasuring ½\" long on both the round and square beak this instrument has an added feature of a fully serrated square beak and a closing groove (series of fine holding grooves). The serrations create a firm non-slip grip when bending and forming retainers. The short stubby hardened steel inserted beaks offer strength when bending, adjusting retainers and also creates a stronger longer lasting instrument.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis bird beak is machined with a series of serrations (grooves) on the inside portion of the square side along with a closing groove\u003c\/li\u003e\n\u003cli\u003eSerrations create a firm non-slip grip on the arch wire and retainer wire.\u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures ½\" in length and the round portion of the beak is round the whole ½\" offering many helix sixes when bending.\u003c\/li\u003e\n\u003cli\u003eBend and form all arch wire round and rectangular along with retainer wire up to .O36\" \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478645719260,"sku":"036","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/036-1.jpg?v=1769038453"},{"product_id":"arch-contouring-forming-plier-standard","title":"Arch Contouring \u0026 Forming Plier (standard)","description":"\u003cp\u003eDesigned for forming and contouring round and rectangular archwire without torque. The arch is approx. 7.5 mm wide and is capable of bending and contouring wire from .012\" up to .040\". The arch shape is determined by the operator and the amount of pressure that is applied when forming the arch. Most important is all edges are beveled and smooth which will eliminate nicking the wire during use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe outside edges are beveled creating a smooth arch without nicking the wire. \u003c\/li\u003e\n\u003cli\u003eOne side of the beak contains an upper arch that fits into a concave pocket which creates the arch. \u003c\/li\u003e\n\u003cli\u003eCapable of contouring an arch on round and rectangular wire ranging from .012\" to .040\". \u003c\/li\u003e\n\u003cli\u003eThe plier measures 7.5mm wide along with a smooth inside working surface. \u003c\/li\u003e\n\u003cli\u003eArch shape can be larger or smaller and this is determined by the amount of pressure applied during operation. \u003c\/li\u003e\n\u003cli\u003eSmooth inside beaks help eliminate torque in the wire when contouring the arch. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647193820,"sku":"063-P","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/063-P-1.jpg?v=1769032509"},{"product_id":"arch-contouring-forming-plier-wide-long","title":"Arch Contouring \u0026 Forming Plier (Wide Long)","description":"\u003cp\u003eUniquely designed this wide arch former is manufactured with a longer and wider beak. There is a gentle curvature on the radius of the beak and can be used to contour an arch on wire up to .036\". The wider gradual curve is excellent for introducing a reverse curve to an archwire. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe outside edges are beveled creating a smooth arch without nicking the wire. \u003c\/li\u003e\n\u003cli\u003eThe plier measures approx. 8.5 mm wide along with a smooth inside working surface.\u003c\/li\u003e\n\u003cli\u003eManufactured with a gentle curvature offers the ability to create a reverse curve in the arch wire along with contouring an arch. \u003c\/li\u003e\n\u003cli\u003eOne side if the beak contains an upper arch that fits into a concave pocket which creates the arch. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .036\" diameter. \u003c\/li\u003e\n\u003cli\u003eArch shape can be larger or smaller and this is determined by the amount of pressure applied during operation. \u003c\/li\u003e\n\u003cli\u003eSmooth inside beaks help eliminate torque in the wire when contouring the arch. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647292124,"sku":"063-PL","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/063-PL-1.jpg?v=1769032514"},{"product_id":"hawley-retainer-forming-plier","title":"Hawley Retainer Forming Plier","description":"\u003cp\u003eThis multipurpose lab instrument is actually three pliers in one for forming retainers. The front barrel is used just like a bird beak; the second barrel will give large loops keeping retainers looking uniform. Toward the rear of the beak we have placed an arch-contouring section to contour and make an arch.  When needing to produce retainers, this is an excellent choice for it will keep all wire on the same plain and loops uniform.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe front barrel measures 1.75 mm (.070\") diameter and is capable of bending lab wire up to .036\" diameter. \u003c\/li\u003e\n\u003cli\u003eThe front barrel creates a tight helix, simple stops and eyehooks for the acrylic. \u003c\/li\u003e\n\u003cli\u003eThe second barrel measures 3.75 mm (.150\") diameter and creates uniform loops and keeps them on the same plain. \u003c\/li\u003e\n\u003cli\u003eToward the rear of the beak is an arch contouring section that can create or reshape any retainer arch.\u003c\/li\u003e\n\u003cli\u003eThis instrument is three pliers in one eliminating the need to keep switching pliers during use.\u003c\/li\u003e\n\u003cli\u003eRecommended on lab wire up to .036\" diameter. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647521500,"sku":"065","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/065-1_0ed72403-0f19-492f-9fb4-ba23d17c9165.jpg?v=1769038474"},{"product_id":"bernard-plier-with-cutter-5-1-8-long-heavy-wire","title":"Bernard Plier with Cutter (5 1\/8” Long) (Heavy Wire)","description":"\u003cul\u003e\n\u003cli\u003eMulti use instrument that can be used for retainer, head gear adjustments and excellent for lab use. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting and bending headgear and retainer wire up to .080\". \u003c\/li\u003e\n\u003cli\u003eBeaks open and close parallel to eliminate slippage during bending. \u003c\/li\u003e\n\u003cli\u003eInside jaws are serrated to ensure a firm grip. \u003c\/li\u003e\n\u003cli\u003eSide cutter will cut parallel making it easier to cut retainer and headgear wire. \u003c\/li\u003e\n\u003cli\u003eThis plated instrument is capable of being Auto-Claved, Cold Sterilized and Dry heat sterilized.\u003c\/li\u003e\n\u003cli\u003e Available in a long handle design catalog #O23-L. Please call Orthopli at 1-800-237-337 for more information. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650175708,"sku":"023","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/023-1.jpg?v=1769038506"},{"product_id":"diagonal-hard-wire-cutter","title":"Diagonal Hard Wire Cutter","description":"\u003cul\u003e\n\u003cli\u003eCapable of cutting all types and sizes of Orthodontic wire up to .080\" diameter. \u003c\/li\u003e\n\u003cli\u003eIdeally used in a lab for cutting retainer wire and headgear. \u003c\/li\u003e\n\u003cli\u003eThe compound spring action offers ease and little pressure when cutting heavy wire. \u003c\/li\u003e\n\u003cli\u003ePlastic grips are molded to the handles for comfort to the operator. \u003c\/li\u003e\n\u003cli\u003eBoth edges of the cutting edge are beveled sharp creating an easier cut. \u003c\/li\u003e\n\u003cli\u003eThis universal cutter is a popular choice and is used in most dental and orthodontic labs. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650208476,"sku":"028","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/028-2.jpg?v=1769038510"},{"product_id":"heavy-side-cutter-vanadium-chrome","title":"Heavy Side Cutter (Vanadium Chrome)","description":"\u003cul\u003e\n\u003cli\u003eThe uniqueness to this instrument is that it resembles and has the appearance of a standard orthodontic plier. \u003c\/li\u003e\n\u003cli\u003eWhen used chairside is does not look like a large lab cutter and fits in most cassette trays. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting retainer wire up to .040\" and all arch wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for lab use and cutting of heavy wire.  \u003c\/li\u003e\n\u003cli\u003eVanadium chrome plated instrument is capable of being autoclaved, cold sterilized and dry heat sterilized. \u003c\/li\u003e\n\u003cli\u003eMeasures 5 3\/4\"in length and offers an easy cut with little effort. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650241244,"sku":"021","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/021-2.jpg?v=1769038514"},{"product_id":"three-prong-adjusting-plier-standard-tip","title":"Three Prong Adjusting Plier (Standard Tip)","description":"\u003cp\u003eOrthopli's most popular and versatile 3-prong. This plier can be used both chairside and in the lab. The beaks are machined to what Orthopli calls a standard tip size 3-prong. Recommended to adjust and form retainers. It's recommended to bend stainless steel retainer lab wire up to .036\" dia. at the tip ad .040\" toward the rear of the tip. Manufactured with a parallel opening to eliminate wire slippage during use.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThroughout the years this standard tip 3-prong has become Orthopli's most popular 3-prong. \u003c\/li\u003e\n\u003cli\u003eCan be used chairside for retainer adjustments. \u003c\/li\u003e\n\u003cli\u003eMost popular lab instrument for fabricating and adjusting retainers. \u003c\/li\u003e\n\u003cli\u003eRecommended to bend stainless steel lab retainer wire up to .036\" dia. at the tip.\u003c\/li\u003e\n\u003cli\u003eManufactured with parallel beaks when open to eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eThe beaks are machined close together to fit in tight areas. \u003c\/li\u003e\n\u003cli\u003eManufactured of an all stainless steel box joint forging.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478696870108,"sku":"064","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/064-2.jpg?v=1769038785"},{"product_id":"three-prong-adjusting-plier-medium-tip","title":"Three Prong Adjusting Plier (Medium Tip)","description":"\u003cp\u003eMedium tip 3-prong can be used both chairside and in the lab. Beaks are manufactured and ground down to a medium point. Capable of adjusting all arch wires round, rectangular and retainer wire up to .030\" dia.  Recommended chairside to adjust retainers and close vertical and closing loop. The medium beak creates excellent reach for tight areas on a retainer. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to be used both chairside and in the lab for forming retainers. \u003c\/li\u003e\n\u003cli\u003eBeaks are thinned down to a medium size. \u003c\/li\u003e\n\u003cli\u003eRecommended for all stainless steel retainer wire up to .030\"dia. \u003c\/li\u003e\n\u003cli\u003eMedium beaks offer easy access for tight areas. \u003c\/li\u003e\n\u003cli\u003eAdjust retainer's chairside and small vertical retainer loops. \u003c\/li\u003e\n\u003cli\u003eConstructed of an all stainless steel box joint forging. \u003c\/li\u003e\n\u003cli\u003eManufactured with parallel beaks when open to eliminate slippage during use. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478696902876,"sku":"064-M","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/064-2_5668a73d-b5d6-4da9-8280-fbd1818bdd70.jpg?v=1769038790"},{"product_id":"three-prong-adjusting-plier-small-tip","title":"Three Prong Adjusting Plier (Small Tip)","description":"\u003cp\u003eThis is the finest and smallest tip of all the three prongs manufactured by Orthopli Corporation. Most offices use this instrument chair side for placing minor bends and adjustments in an arch wire. The 3-beaks are thin and tapered to a fine point. Having the beaks thin and tight together it can also be used to cinch and crimp nickel titanium arch wire. Recommended for round and rectangular wire up to .022\" and .019\" x .025\". \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to be used chairside. \u003c\/li\u003e\n\u003cli\u003eThinnest beaks of all the manufactured 3-prongs. \u003c\/li\u003e\n\u003cli\u003eThin beaks create easy access while adjusting tie back loops, vertical loops etc.\u003c\/li\u003e\n\u003cli\u003eRecommended for stainless steel wire and nickel titanium. \u003c\/li\u003e\n\u003cli\u003eManufactured with parallel beaks when open to eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eNot recommended for lab use (heavy wire).\u003c\/li\u003e\n\u003cli\u003eCan be used to cinch a niti-wire and place minor bends in an arch wire. \u003c\/li\u003e\n\u003cli\u003eConstructed on an all stainless steel box joint forging. \u003c\/li\u003e\n\u003cli\u003eRecommended for both round and rectangular archwire up to .022\" diameter and .019\" x .025\". \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478696935644,"sku":"064-S","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/064-S.jpg?v=1769033165"},{"product_id":"three-prong-adjusting-plier-large-tip","title":"Three Prong Adjusting Plier (Large Tip)","description":"\u003cp\u003eThis 3-prong is manufactured with a large tip and is recommended for adjusting a large wire up to .060\" dia. The beaks in most cases are too large to adjust and form retainers. Designed to bend large wire similar to the inner bow of a head gear. Manufactured with parallel opening beak to help eliminate slippage during use. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLargest beak of all the three prongs. \u003c\/li\u003e\n\u003cli\u003eRecommended for a large stainless steel wire up to .060\" dia. \u003c\/li\u003e\n\u003cli\u003eCapable of adjusting and forming the inner bow of a head gear. \u003c\/li\u003e\n\u003cli\u003eBeaks have a parallel opening to eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eManufactured with stubby short beaks to help create an easy bend during use. \u003c\/li\u003e\n\u003cli\u003eConstructed of an all stainless steel box joint forging. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478696968412,"sku":"064-L","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/064-L-3.jpg?v=1769033169"},{"product_id":"head-gear-and-face-bow-bending-plier","title":"Head Gear and Face Bow Bending Plier","description":"\u003cp\u003eCleverly designed to bend the inner and outer bow or head gear with little force up to .075\" wire. Operates like a three prong plier and includes a groove at the tip to secure the wire from slipping during use. Constructed on a long handle to increase the leverage and force creating an easy bend on the inner or outer bow of the head gear. This instrument is approximately ¾\" longer than a normal instrument and the body is slightly larger for strength.    \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBend inner and outer of a headgear with little force. \u003c\/li\u003e\n\u003cli\u003eRecommended to bend wire up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eBeaks are grooved to secure and eliminate wire slippage during use. \u003c\/li\u003e\n\u003cli\u003eOperates like an extra-large 3-prong. \u003c\/li\u003e\n\u003cli\u003eThis instrument is approximately ¾\" larger than a standard plier. \u003c\/li\u003e\n\u003cli\u003eThe extended length and larger body offers leverage and strength. \u003c\/li\u003e\n\u003cli\u003eManufactured of an all stainless steel box joint forging. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697001180,"sku":"067","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/067.jpg?v=1769038794"},{"product_id":"double-angled-quad-helix-adjusting-plier","title":"Double Angled Quad Helix Adjusting Plier","description":"\u003cp\u003eDesigned for intraoral adjustments and activating a quad helix, retainers, and lingual arch adjustments. The offset beaks allow the operator to adjust a quad-helix interiorly in the mouth without removing the quad-helix. Manufactured with a double sided beak which will allow adjustments to the quad-helix right or left. Works just like a three prong and is capable of bending wire up to .036\" dia.   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjust a quad-helix interiorly, along with minor adjustments on expansion screw arms. \u003c\/li\u003e\n\u003cli\u003eOffset beak offers easy and visible access during use. \u003c\/li\u003e\n\u003cli\u003eRecommended to adjust a quad-helix wire up to .036\" dia. \u003c\/li\u003e\n\u003cli\u003eDouble sided beaks allow the operator to make a left and right bend interiorly. \u003c\/li\u003e\n\u003cli\u003eThis instrument is like having a left and right hand angled three prong in one instrument. \u003c\/li\u003e\n\u003cli\u003eThe use of this instrument is an extreme time saver when used chairside. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697033948,"sku":"064-DA","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/064-DA-2.jpg?v=1769033179"},{"product_id":"arch-forming-plier-for-nickel-titanium","title":"Arch Forming Plier for Nickel Titanium","description":"\u003cp\u003eManufactured with an extremely tight arch form the measures 3mm wide. The tight arch form is needed to over contour the nickel titanium arch during use when reshaping or forming the arch. Over bending is necessary because the nickel titanium wire will rebound slightly.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened insert to help hold the arch form. \u003c\/li\u003e\n\u003cli\u003eDesigned to form or reshape the arch on nickel titanium wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for nickel titanium wire both round and rectangular up to .020\" dia. and .019\" x .025\".\u003c\/li\u003e\n\u003cli\u003eMeasures 3mm wide along with a tight arch form. \u003c\/li\u003e\n\u003cli\u003eAll edges are beveled which will eliminate nicking of the arch wire during use. \u003c\/li\u003e\n\u003cli\u003eOne beak has a sharp radius arch and fits into the lower beak concave groove. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697066716,"sku":"063-N","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/063-N-3.jpg?v=1769033183"},{"product_id":"arch-forming-plier-with-groove","title":"Arch Forming Plier with Groove","description":"\u003cp\u003eDesigned to form, adjust, or contour a round or rectangular arch wire without placing torque in the arch wire. Both beaks are manufactured with a hardened insert. The inside of one beak has 3- machined grooves that will accept .018\", .020\", and .022\" rectangular or round wire. The opposing beak has beveled edges and is used to form the arch without nicking the arch wire. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to form, adjust, and contour an arch wire. \u003c\/li\u003e\n\u003cli\u003eBy placing the wire in the machined groove this will eliminate torque in the completed arch form. \u003c\/li\u003e\n\u003cli\u003e3-Grooves on the arch former measuring .018\", .020\", and .022\" slot. \u003c\/li\u003e\n\u003cli\u003eGroove will accept both round and rectangular wire. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened insert. \u003c\/li\u003e\n\u003cli\u003eThe beak that forms the arch form has beveled edges to eliminate nicking of the arch wire.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697361628,"sku":"063","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/063-2.jpg?v=1769038798"},{"product_id":"face-bow-adjusting-plier","title":"Face Bow Adjusting Plier","description":"\u003cp\u003eOne of Orthopli's most popular heavy-wire adjusting and bending instruments. Manufactured on a medium large handle forging which helps create an easy bend with little force on heavy wire. Both beaks are flat with 3-holding grooves on each side of the beak. During use place the wire in the holding groove which will lock the wire in place eliminating slippage. Recommended to adjust and bend wire up to .075\"dia. \u003c\/p\u003e\u003cp\u003e   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjust face bows, head gear, and retainer. \u003c\/li\u003e\n\u003cli\u003eManufactured with 3 holding grooves on both side of the beaks. \u003c\/li\u003e\n\u003cli\u003eHolding groove locks the wire in place to eliminate slippage.\u003c\/li\u003e\n\u003cli\u003eDuring use place the wire in the groove to eliminate slippage. \u003c\/li\u003e\n\u003cli\u003eRecommended to bend and adjust wire up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eManufactured on a medium plier forging to offer more leverage and strength during use. \u003c\/li\u003e\n\u003cli\u003eMany offices use this instrument chairside on all types of heavy wire from size .025\" up to .075\" dia.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697394396,"sku":"035","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/035-3.jpg?v=1769038802"},{"product_id":"bird-beak-extra-large-3-grooves","title":"Bird Beak Extra Large (3-Grooves)","description":"\u003cp\u003eExtra-large beaks make the bending of large wire extremely easy with very little force. One side of the beak is round, and the opposing side is flat with 3 deep grooves on the flat side. During use when the wire is positioned in the groove it will lock the wire in place eliminating slippage. Recommended for bending wire up to .075\" dia. Both beaks are manufactured with a hardened insert for strength, extending the life of the tips and helping to eliminate slippage. \u003c\/p\u003e\u003cp\u003e   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .055\" at the tip.\u003c\/li\u003e\n\u003cli\u003e3 holding grooves are machined on the flat side of the beak. \u003c\/li\u003e\n\u003cli\u003ePlace the wire in the holding groove during use (wire will lock in position) to eliminate slippage. \u003c\/li\u003e\n\u003cli\u003eRecommended to bend stainless steel wire up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage. \u003c\/li\u003e\n\u003cli\u003eDesigned on a large handle plier which bends heavy wire with little effort. \u003c\/li\u003e\n\u003cli\u003eEasily bend and adjust retainers, face bow, and head gear.  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697427164,"sku":"035-N","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/035-N-2.jpg?v=1769033197"},{"product_id":"bird-beak-plier-large-serrated","title":"Bird Beak Plier (Large, Serrated)","description":"\u003cp\u003eSerrations on Orthopli's large beak plier are an excellent feature for it will secure a large wire from slipping during use. Serrations are a series of small grooves that are machined on the inside surface of the flat side of the bird beak tip. The opposing beak is round and is recommended to bend stainless steel wire up to .075\" dia. This instrument is manufactured on a large body plier along with a hardened inserted tip for added strength. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis bird beak is machined with a series of serrations (grooves) on the inside portion of the square side along with a closing groove. \u003c\/li\u003e\n\u003cli\u003eSerrations create a firm non-slip grip when bending heavy wire. \u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .055\" at the tip.\u003c\/li\u003e\n\u003cli\u003eRecommended to bend stainless steel wire up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage. \u003c\/li\u003e\n\u003cli\u003eDesigned on a large handle plier for more force and leverage to bend heavy wire with little effort. \u003c\/li\u003e\n\u003cli\u003eEasily bend and adjust retainers, face bow, and head gear.  \u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the complete round portion of the beak offers helixes of many sizes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697492700,"sku":"036-XL","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/036-XL-3.jpg?v=1769033201"},{"product_id":"bird-beak-plier-large-no-serrations","title":"Bird Beak Plier (Large, No Serrations)","description":"\u003cp\u003eWhen heavy wire bending is required this large bird beak plier will work with little effort. Recommended to bend stainless steel wire up to .075\" dia. Manufactured on a large body plier along with hardened inserted tips for added strength, helps eliminate slippage and leverage when bending wire.  One side of the beak is round for forming loops, bends and adjustments in retainers, head gear, and face bows. The opposing beak has flat working surface. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .055\" at the tip and are recommended for retainer adjustments, head gear, or all heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak offers helixes of many sizes. \u003c\/li\u003e\n\u003cli\u003eRecommended to bend stainless steel wire up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eDesigned on a large handle plier for more force and leverage to bend heavy wire with little effort. \u003c\/li\u003e\n\u003cli\u003eEasily bend and adjust retainers, face bow, and head gear.  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697558236,"sku":"034-XL","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-XL-2.jpg?v=1769033205"},{"product_id":"bird-beak-plier-large-045-dia-tip","title":"Bird Beak Plier (Large .045” Dia. Tip)","description":"\u003cul\u003e\n\u003cli\u003eManufactured on a medium large handle. \u003c\/li\u003e\n\u003cli\u003eThe handle and tip size is between a standard handle and a large handle plier. \u003c\/li\u003e\n\u003cli\u003eBoth the round and square beak measures .045\" dia. at the tip. \u003c\/li\u003e\n\u003cli\u003eBeaks are manufactured with hardened inserts. \u003c\/li\u003e\n\u003cli\u003eHardened inserts help eliminate slippage during use and increase the life of the instrument.\u003c\/li\u003e\n\u003cli\u003eRecommended to adjust and bend wire up to .055\" dia. \u003c\/li\u003e\n\u003cli\u003eAn optional cutter can be added at the rear of the beak catalog #O34-LC (please call).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697591004,"sku":"034-L","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-L-2.jpg?v=1769033209"},{"product_id":"adams-plier-square-beak-large","title":"Adams Plier (Square Beak- Large)","description":"\u003cp\u003eThis Adams plier is manufactured on a large plier for increase strength to bend heavy wire with little effort. Both beaks are square at the tip along with a hardened insert on both sides. Hardened inserts help eliminate slippage during use and increase the strength of the working surface. Due to the size of the instrument it is capable of bending wire up to .075\" dia. The double square beaks are strongly recommended for the forming of Adams-Claps.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth beaks are square at the tip and measure .055\" square. \u003c\/li\u003e\n\u003cli\u003eBeaks are manufactured with hardened inserts. \u003c\/li\u003e\n\u003cli\u003eHardened inserts help eliminate slippage during use and increase the life of the instrument.\u003c\/li\u003e\n\u003cli\u003eRecommended to adjust and bend wire up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eBeaks open parallel at 1mm that will help eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eManufactured on a large plier that will help bend heavy wire with little effort.   \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697623772,"sku":"034-SL","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-SL-3.jpg?v=1769033213"},{"product_id":"lingual-arch-forming-and-closing-plier","title":"Lingual Arch Forming and Closing Plier","description":"\u003cp\u003eForming lingual arches is a quick and easy bend when using this particular instrument. Most important both beaks are manufactured with a hardened insert to permit longer wear and afford greater accuracy. Two grooves are machined close to the beak to allow a tight bend. Three additional grooves are placed at the rear of the beak to close the bend tight to fit properly into the lingual sheath.    \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForm lingual arches and double bend wires to be placed in lingual sheaths. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with hardened inserts. \u003c\/li\u003e\n\u003cli\u003eHardened inserts increase the instruments strength along with greater accuracy. \u003c\/li\u003e\n\u003cli\u003eTwo small grooves are machined at the tip (for a tight double bend). \u003c\/li\u003e\n\u003cli\u003eThree large grooves are machined on the lower beak to tightly squeeze the double bend tight. \u003c\/li\u003e\n\u003cli\u003eLower groove measures .030\", .036\", and .025\" on each side. \u003c\/li\u003e\n\u003cli\u003eWhen used properly the double bend should snap into the lingual sheath. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697656540,"sku":"059","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/059-3.jpg?v=1769038806"},{"product_id":"face-bow-adjusting-plier-short","title":"Face Bow Adjusting Plier (Short)","description":"\u003cul\u003e\n\u003cli\u003eMeasures approximately 5\" in length. \u003c\/li\u003e\n\u003cli\u003eThe beak area is grooved to lock the wire in place. \u003c\/li\u003e\n\u003cli\u003eCapable of bending face bow and head gear up to .075\" dia. \u003c\/li\u003e\n\u003cli\u003eBeaks are grooved close to the center pin (helps bend with little effort) \u003c\/li\u003e\n\u003cli\u003eManufactured on an all stainless steel box joint forging. \u003c\/li\u003e\n\u003cli\u003eAll edges are beveled to eliminate wire nicking. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697722076,"sku":"070","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/070.jpg?v=1769038809"},{"product_id":"bernard-plier-with-cutter-large-6-3-4","title":"Bernard Plier with Cutter (Large 6 ¾)","description":"\u003cul\u003e\n\u003cli\u003eMulti use instrument that can be used chair side and excellent for lab use. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting and bending headgear and retainer wire up to .080\". \u003c\/li\u003e\n\u003cli\u003eBeaks open and close parallel to eliminate slippage during bending. \u003c\/li\u003e\n\u003cli\u003eInside jaws are serrated to ensure a firm grip. \u003c\/li\u003e\n\u003cli\u003eSide cutter will cut parallel making it easier to cut retainer and headgear wire. \u003c\/li\u003e\n\u003cli\u003eMeasures 6 ¾\" in length.  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697787612,"sku":"023-L","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/023-1_2128f0e9-d21c-4781-b8e7-a79fe4dfa89d.jpg?v=1769038813"},{"product_id":"large-wire-cutter","title":"Large Wire Cutter","description":"\u003cul\u003e\n\u003cli\u003eCapable of cutting wire up to .080\" diameter (2mm). \u003c\/li\u003e\n\u003cli\u003eCut retainer wire, face bow, inner, and outer bow of a head gear. \u003c\/li\u003e\n\u003cli\u003eMeasure 7 ½\" in length. \u003c\/li\u003e\n\u003cli\u003eThe pivoting closing action creates force during use making cutting an ease. \u003c\/li\u003e\n\u003cli\u003eConstructed of stainless steel. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478697853148,"sku":"023-LWC","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/023-LWC-CY.jpg?v=1769033231"},{"product_id":"face-bow-plier","title":"Face Bow Plier","description":"\u003cp\u003eWith the use of this one instrument, the orthodontist or technician can install the bayonet bend or loop on the inner bow automatically with one movement of the plier. Using the tip portion of the plier, it opens, closes and forms the outer bow loop with the utmost of ease. This instrument has a cutter which is capable of cutting the inner and outer box with minimum effort - a must for any orthodontist doing head gear or face box adjustments. \u003c\/p\u003e\u003cp\u003e   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to cut and bend face bow wire up to .080\" dia. \u003c\/li\u003e\n\u003cli\u003eHardened inserts increase the strength of the cutting edge and creates an easier cut during use.\u003c\/li\u003e\n\u003cli\u003eCut and shorten the inner and outer bow with little effort. \u003c\/li\u003e\n\u003cli\u003eHardened inserts are also placed on the front beaks for strength. \u003c\/li\u003e\n\u003cli\u003eFront beak creates a new hook on the face bow after cutting and shortening the face bow with the extended pin. \u003c\/li\u003e\n\u003cli\u003eThe rear of the front beak will put a bayonet bend on the inner and outer bow. \u003c\/li\u003e\n\u003cli\u003eBoth the cutter and beak open parallel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478698246364,"sku":"068","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/068.jpg?v=1769043847"},{"product_id":"face-bow-plier-with-grooved-tip","title":"Face Bow Plier with Grooved Tip","description":"\u003cp\u003eConstructed on the same forging as the # O68. This is an excellent face bow, head gear and lab instrument. Both the tip and cutting edge are manufactured with hardened steel inserts, capable of bending, cutting, and forming loops on the inner and outer bow of a head gear. The inserted beaks at the front have 3 deepened grooves that securely lock in the wire when bending (elimination slippage). The beak is thin and round to form a hook on the outer bow after it is cut and shortened. \u003c\/p\u003e\u003cp\u003e   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to cut and bend face bow wire up to .080\" dia. \u003c\/li\u003e\n\u003cli\u003eHardened insert increases the strength of the cutting edge and         provides an easier cut during use.  \u003c\/li\u003e\n\u003cli\u003eCut and shorten the inner and outer bow with little effort. \u003c\/li\u003e\n\u003cli\u003e3- Holding grooves are machined at the tip of the plier to eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eBy placing the face bow in any groove it will lock the wire in place for adjustment. \u003c\/li\u003e\n\u003cli\u003eThe first groove closest to the tip is used to place a new hook on the face bow or head gear after it is cut. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478698311900,"sku":"068-G","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/068-G.jpg?v=1769043851"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/collections\/BAN-LI.jpg?v=1770762007","url":"https:\/\/www.orthopli.com\/collections\/lab-instruments.oembed","provider":"Orthopli","version":"1.0","type":"link"}