{"title":"Pliers","description":null,"products":[{"product_id":"light-wire-forming-plier-no-grooves","title":"Light Wire Forming Plier No Grooves","description":"\u003cp\u003eOne of Orthopli's most popular light wire loop forming pliers manufactured with a fine tapered round and square beak. The loop former beaks are ground down to their finest point to help create the tight bend along the fine helix. This plier is designed with no grooves on the inside working area. Hardened steel inserted beaks will help eliminate slippage when forming and bending wire which also creates a stronger longer lasting instrument. This instrument is recommended for chair side to form and bend round or rectangular wire up to .025\" diameter and .019 x .025\".\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" inches allowing sharp tight bend and helixes.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the beak to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eThere are no grooves on the inside of the instrument and the rear portion of the beak has two flat sections for straightening, bending, and closing loops. \u003c\/li\u003e\n\u003cli\u003eThe round portions of the beaks are machined to achieve a tight smooth bend and helix during chair side operation. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .019\" x .025\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478643622108,"sku":"030","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/030-2_43ebedde-6108-498b-ae64-b2dd6e66e95c.jpg?v=1769038442"},{"product_id":"light-wire-forming-plier-with-cutter-no-grooves","title":"Light Wire Forming Plier with Cutter (No-Grooves)","description":"\u003cp\u003eCleverly designed having both a fine tapered round and square beak along with an additional built in anvil cutter placed at the rear portion of the beaks. This instrument allows the operator to form, bend and cut the arch wire with one instrument, saving time and motion. The cutter is designed to cut both round and rectangular wire up to .025\" diameter and .019\" x .025\". Both beaks are manufactured with hardened steel inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" inches allowing sharp tight bend and helixes.\u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built-in anvil cutter capable of cutting all archwire up to .025\" diameter and .019\" x .025\".\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the beak to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eThe round portions of the beaks are machined to achieve a tight smooth bend and helix during chair side operation. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .019\" x .025\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003cli\u003eOptional holding groove can be placed at the tip catalog#030-GC -light wire forming plier with cutter 1-groove please call 1-800-237-3737. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478643654876,"sku":"030-C","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/030-C-2.jpg?v=1769032398"},{"product_id":"light-wire-forming-plier-2-grooves-at-tip","title":"Light Wire Forming Plier (2 Grooves at Tip)","description":"\u003cp\u003eManufactured with a thin tapered round and square beak along with an additional two grooves at the tip. The first groove is 1 mm, and the second groove is 2 mm from the tip on the square side. A larger groove is milled towards the rear on the two flat surfaces allowing for closing loops. Recommended for chair side to form and bend wire up to .025\" diameter and .019\" x .025\". Both beaks are manufactured with hardened steel inserts to help eliminate slippage which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" inches allowing sharp tight bend and helixes.\u003c\/li\u003e\n\u003cli\u003eTwo grooves are placed 1 mm and 2 mm back from the tip on the flat side and a closing groove at the rear.\u003c\/li\u003e\n\u003cli\u003eThe grooves help secure an arch wire when bending loops and keep a uniformed loop. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eThe round portions of the beaks are machined to achieve a tight smooth bend and helix during chair side operation. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .019\" x .025\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478643687644,"sku":"032","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/032-1.jpg?v=1769038445"},{"product_id":"light-wire-forming-plier-with-cutter-2-grooves-at-tip","title":"Light Wire Forming Plier with Cutter (2 Grooves at Tip)","description":"\u003cp\u003eTips are constructed with a thin tapered round and square beak; two grooves are placed at the tip and are accompanied by an anvil wire cutter at the rear of the beak. The grooves are placed 1 mm and 2 mm back from the tip on the flat side. The cutter at the rear of the beak is capable of cutting round and rectangular wire up to .025\" diameter and .019\" x .025\" saving time and motion with the added cutter. Both beaks are manufactured with hardened steel inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" inches allowing sharp tight bend and helixes. \u003c\/li\u003e\n\u003cli\u003eTwo grooves are placed 1 mm and 2 mm back from the tip on the flat side.\u003c\/li\u003e\n\u003cli\u003eThe grooves help secure an arch wire when bending loops. \u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built in anvil cutter capable of cutting all arch wire up to .025\" diameter and .019\" x .025\" round and rectangular.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe round portions of the beaks are machined to achieve a tight smooth bend and helix during chair side operation. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .019\" x .025\".\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478643785948,"sku":"032-C","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/032-C-1.jpg?v=1769032406"},{"product_id":"light-wire-forming-plier-3-grooves-at-tip","title":"Light Wire Forming Plier (3 Grooves at Tip)","description":"\u003cp\u003eManufactured with a thin tapered round and square beak along with an additional three grooves at the tip. The first groove is 1 mm, the second groove is 2 mm, and the third groove is 3 mm from the tip on the square side. A larger groove is milled towards the rear on the two flat surfaces allowing for closing loops. Recommended for chair side to form and bend wire up to .025\" diameter and .019\" x .025\". Both beaks are manufactured with hardened steel inserts to help eliminate slippage which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" inches allowing sharp tight bend and helixes.\u003c\/li\u003e\n\u003cli\u003eThree grooves are placed 1 mm, 2 mm, and 3 mm back from the tip on the flat side and a closing groove at the rear.\u003c\/li\u003e\n\u003cli\u003eThe grooves help secure an arch wire when bending loops and keep a uniformed loop. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eThe round portions of the beaks are machined to achieve a tight smooth bend and helix during chair side operation. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .019\" x .025\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644211932,"sku":"032-G","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/032-G-1.jpg?v=1769032410"},{"product_id":"light-wire-forming-plier-with-cutter-3-grooves-at-tip","title":"Light Wire Forming Plier with Cutter (3 Grooves at Tip)","description":"\u003cp\u003eManufactured with a fine tapered round and square beak along with three grooves at the tip accompanied by an anvil wire cutter at the rear of the beak. The grooves are places ½ mm, 1 mm and 2 mm back from the tip on the flat side. The cutter at the rear of the beak is capable of cutting round and rectangular wire up to .025\" diameter and .019\" x .025\" saving time and motion with the added cutter. Both beaks are manufactured with a hardened steel insert to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" inches allowing sharp tight bend and helixes. \u003c\/li\u003e\n\u003cli\u003eThree grooves are places ½ mm, 1 mm and 2 mm back from the tip on the flat side.\u003c\/li\u003e\n\u003cli\u003eThe grooves help secure an arch wire when bending loops and also keep a uniform loop. \u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built in anvil cutter capable of cutting all archwire up to .025\" diameter and .019\" x .025\" round and rectangular.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe round portions of the beaks are machined to achieve a tight smooth bend and helix during chair side operation. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .019\" x .025\".\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644310236,"sku":"032-GC","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/032-GC-1.jpg?v=1769032415"},{"product_id":"light-wire-forming-plier-with-arch-former","title":"Light Wire Forming Plier with Arch Former","description":"\u003cp\u003eOrthopli's combination light wire loop forming plier along with a built in arch former is a time saver. This instrument is excellent for chair side and is a great choice to complete a wire adjustment tray set-up. The tip has a thin tapered beak for bending and forming tight loops and bends on an arch wire up to .021\" X .028\". At the rear of the beaks, we have placed an arch former creating two instruments into one.   Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cp\u003e            \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo instruments in one saving time and cost (Loop forming plier along with a built in arch former). \u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" at the tip and are recommended for forming and bending all arch wire. \u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644343004,"sku":"030-H","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/030-H-1.jpg?v=1769032419"},{"product_id":"light-wire-forming-plier-with-arch-former-2-grooves-at-tip","title":"Light Wire Forming Plier with Arch Former (2 Grooves at Tip)","description":"\u003cp\u003eOrthopli's combination light wire loop forming plier along with a built in arch former along with 2- fine groves placed at the tip. The first groove is 1 mm, and the second groove is 2 mm from the tip on the square side.  The grooves help in gripping the wires during use and for consistent helixes. The tip has a thin tapered beak for bending and forming tight loops and bends on an arch wire up to .021\" X .028\". At the rear of the beaks, we have placed an arch former creating two instruments into one.   Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo instruments in one saving time and cost (Loop forming plier along with a built in arch former along with 2-grooves). \u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" at the tip and are recommended for forming and bending all arch wire. \u003c\/li\u003e\n\u003cli\u003eThe first groove is 1 mm, and the second groove is 2 mm from the tip on the square side.\u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644375772,"sku":"032-H","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/032-H-1.jpg?v=1769032423"},{"product_id":"light-wire-forming-plier-with-arch-former-and-cutter","title":"Light Wire Forming Plier with Arch Former and Cutter","description":"\u003cp\u003eCleverly designed, this instrument allows the operator to cut, contour an arch and create a tight bend and helixes all with one instrument. This instrument saves time and eliminates the need for extra instruments in your tray-set for it is three pliers in one. Thin tapered beaks will bend all round and rectangular wire up to .025\"diameter and .021\" x .028\". Both beaks are inserted to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree instruments in one, saving time and cost (Light wire forming plier along with a built in arch former and cutter). \u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" at the tip and are recommended for forming and bending all arch wire. \u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular).\u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a diamond-honed anvil cutter capable of cutting all arch wire and retainer wire up to .028\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644408540,"sku":"030-HC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/030-HC-1.jpg?v=1769032428"},{"product_id":"light-wire-forming-plier-with-arch-former-and-cutter-2-grooves-at-tip","title":"Light Wire Forming Plier with Arch Former and Cutter (2 Grooves at Tip)","description":"\u003cp\u003eCleverly designed, this instrument allows the operator to cut, contour an arch and create a tight bend and helixes all with one instrument along with 2- Grooves. The first groove is 1 mm, and the second groove is 2 mm from the tip on the square side. The grooves help in gripping the wires during use and consistent helixes. This instrument saves time and eliminates the need for extra instruments in your tray-set for it is three pliers in one. Thin tapered beaks will bend all round and rectangular wire up to .025\"diameter and .021\" x .028\". Both beaks are inserted to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree instruments in one, saving time and cost (Light wire forming plier along with a built in arch former and cutter along with 2-grooves). \u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .025\" at the tip and are recommended for forming and bending all arch wire. \u003c\/li\u003e\n\u003cli\u003eThe first groove is 1 mm, and the second groove is 2 mm from the tip on the square side.\u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular).\u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a diamond-honed anvil cutter capable of cutting all arch wire and retainer wire up to .028\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eBend and form both rectangular and round wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644441308,"sku":"032-HC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/032-HC-1.jpg?v=1769032432"},{"product_id":"bird-beak-bending-plier-1-2-long","title":"Bird Beak Bending Plier (1\/2\" long)","description":"\u003cp\u003eOrthopli's most popular bird beak bending instrument, measuring ½ inch in length and .036\" at the tip on both the round and square sides. The short stubby beak offers strength during bending. Recommended for wire up to .036\" (Example: retainer adjustment or retainer forming) Hardened steel inserted beaks will help eliminate slippage when forming or bending wire and also makes it a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures ½\" in length and the round portion of the beak is round the whole ½\" offering many helix sizes when bending.\u003c\/li\u003e\n\u003cli\u003eBend and form all archwire round and rectangular along with retainer wire up to .036\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecommended for retainer adjustment cassettes when setting up tray set-ups\u003c\/p\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644572380,"sku":"034","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-1.jpg?v=1769038449"},{"product_id":"bird-beak-bending-plier-with-cutter-1-2-long","title":"Bird Beak Bending Plier with Cutter (1\/2\" Long)","description":"\u003cp\u003eThis bird beak features the most up to date built in anvil cutter, in the rear portion of the beaks. The operator can bend and cut with the same plier, using one instrument, saving time and motion. (Example: Bend or adjust a retainer and cut off extended ends all with one instrument)The instrument is capable of cutting and forming wire up to .O36\". Hardened steel inserted beaks are placed at the tip to help eliminate slippage when forming or bending wire which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built in wire cutter capable of cutting all archwire and retainer wire up to .O36\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures ½\" in length and the round beak is excellent for bending many loop sizes. \u003c\/li\u003e\n\u003cli\u003eBend and form all archwire round and rectangular along with retainer wire up to .O36\" \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003cli\u003eRecommended for retainer adjustment cassettes when setting up for tray set-ups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644670684,"sku":"034-C","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-C-1.jpg?v=1769032441"},{"product_id":"bird-beak-bending-plier-long-5-8-length","title":"Bird Beak Bending Plier Long (5\/8\" length)","description":"\u003cp\u003eDue to its design this multipurpose bird beak is excellent for both chairside and retainer adjustments.  The added length to this bird beak offers the operator a more gradual tapered beak. Both round and square beaks measure .O36\" and is recommended for bending wire up to .O36\" round or rectangular wire. (Example: Retainer adjustment or retainer forming) Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cp\u003e     \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeaks measure 5\/8\" in length and round beak is gradually tapered the whole length. \u003c\/li\u003e\n\u003cli\u003eOffers a small beak for chairside along with strength at the rear for heavier wire bending up to .O36\" (Retainer adjustment).\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round beak is excellent for bending many loop sizes. \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003cli\u003eRecommended for retainer adjustment cassettes when setting up for Tray set-ups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644703452,"sku":"034-X","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-X-1.jpg?v=1769032445"},{"product_id":"bird-beak-bending-plier-long-with-cutter-5-8-length","title":"Bird Beak Bending Plier Long with Cutter (5\/8” length)","description":"\u003cp\u003eOrthopli's multipurpose bird beak is manufactured with built in cutter at the rear of the beaks along with the long tapered beak for excellent chair side and retainer adjustment. The operator will be capable of bending, adjusting and cutting all round and rectangular arch wire with one instrument. Recommended to form and cut retainer wire up to .O36\" all with one instrument. Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeak measures 5\/8\" long on both the round and square side along with an anvil cutter in the rear portion of the beaks.\u003c\/li\u003e\n\u003cli\u003eThe extended beaks are gradually tapered to the cutter making this instrument excellent for both chair side and retainer adjustment.\u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak is round the whole 5\/8\" offering many helix sixes when bending.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644736220,"sku":"034-XC","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-XC-3.jpg?v=1769032449"},{"product_id":"bird-beak-bending-plier-with-arch-former","title":"Bird Beak Bending Plier with Arch Former","description":"\u003cp\u003eCleverly designed, this combination instrument is two instruments into one. As a manufacture, Orthopli Corporation is able to combine a bird beak bending instrument along with an arch former creating one unique plier. This combination allows the operator to form or bend arch wire and retainer wire at the tip and then create or modify the arch form with the built in arch contouring portion at the base of the instrument. Being able to perform 2-steps with one instrument is a time saver and cost savings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beak measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular) and lab wire up to .O36\". \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak is round the whole 5\/8\" offering many helix sixes when bending.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003cli\u003eRecommended for retainer adjustment cassettes when doing tray set-ups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644768988,"sku":"034-H","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-H-1.jpg?v=1769032454"},{"product_id":"bird-beak-bending-plier-with-arch-former-and-cutter","title":"Bird Beak Bending Plier with Arch Former and Cutter","description":"\u003cp\u003eThis instrument will allow the operator to bend, form loops, contour an arch, cut retainer wire and arch wire with just one instrument. Orthopli has once again designed this complex instrument creating another multipurpose combination plier. This instrument is manufactured with a bird beak style bending beak along with an arch former located at the rear of the tip and an added built in cutter is placed in the middle. Combining these three features into 1-multipurpose plier saves both time and money.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eThe added arch-former is located at the rear of the beak and is capable of contouring a smooth arch on all arch wire (round or rectangular) and lab wire up to .036\". \u003c\/li\u003e\n\u003cli\u003eTowards the middle of the tip is a built in cutter capable of cutting all arch wire and retainer wire up to .036\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eThe tip measures 5\/8\" in length and the round portion of the beak is round the whole 5\/8\" offering many helix sizes when bending.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eBend and form all arch wire round and rectangular along with retainer wire up to .036\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478644834524,"sku":"034-HC","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-HC-1.jpg?v=1769032458"},{"product_id":"adams-plier-square-beak-medium-large","title":"Adams Plier (Square Beak- Medium\/Large)","description":"\u003cp\u003eConstructed on a medium plier handle that is slightly larger than the standard instrument. This double square beak instrument is capable of bending wire up to .045\" dia. Both beaks are manufactured with a hardened insert at the tip to help eliminate slippage during use. Hardened inserts also help extend the life of the instrument. When the instrument is open at 1mm both beaks are parallel to help eliminate slippage when bending a heavy wire. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth beaks are square at the tip and measure .045\" square. \u003c\/li\u003e\n\u003cli\u003eBeaks are manufactured with hardened inserts. \u003c\/li\u003e\n\u003cli\u003eHardened inserts help eliminate slippage during use and increase the life of the instrument.\u003c\/li\u003e\n\u003cli\u003eRecommended to adjust and bend wire up to .050\" dia. \u003c\/li\u003e\n\u003cli\u003eBeaks open parallel at 1mm that will help eliminate slippage during use. \u003c\/li\u003e\n\u003cli\u003eManufactured on a medium\/large plier that will help bend heavy wire with little effort.   \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478645391580,"sku":"034-S","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/034-S-1.jpg?v=1769032462"},{"product_id":"bird-beak-plier-with-serrations","title":"Bird Beak Plier with Serrations","description":"\u003cp\u003eMeasuring ½\" long on both the round and square beak this instrument has an added feature of a fully serrated square beak and a closing groove (series of fine holding grooves). The serrations create a firm non-slip grip when bending and forming retainers. The short stubby hardened steel inserted beaks offer strength when bending, adjusting retainers and also creates a stronger longer lasting instrument.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis bird beak is machined with a series of serrations (grooves) on the inside portion of the square side along with a closing groove\u003c\/li\u003e\n\u003cli\u003eSerrations create a firm non-slip grip on the arch wire and retainer wire.\u003c\/li\u003e\n\u003cli\u003eBoth round and square beaks measure .036\" at the tip and are recommended for retainer adjustment or heavy wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire.\u003c\/li\u003e\n\u003cli\u003eThe tip measures ½\" in length and the round portion of the beak is round the whole ½\" offering many helix sixes when bending.\u003c\/li\u003e\n\u003cli\u003eBend and form all arch wire round and rectangular along with retainer wire up to .O36\" \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478645719260,"sku":"036","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/036-1.jpg?v=1769038453"},{"product_id":"tweed-loop-forming-plier-3-barrel","title":"Tweed Loop Forming Plier 3-Barrel","description":"\u003cp\u003eManufactured with three different size barrels at the tip allowing the operator to create tight helixes without introducing any torque in the wire. The tip of the lower beak is concaved and finely serrated which both aid when bending and help create firm grip eliminating slippage. Towards the rear of the beak is a utility groove for the closing of loops. This is one of Orthopli's most fragile instruments. Make best effort to help bend the wire with your fingers taking some of the stress off the tip of the plier.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront barrel measures .045\" diameter, middle barrel .060\" diameter, and rear barrel .075\" diameter. \u003c\/li\u003e\n\u003cli\u003eWhen forming loops on a barrel you will not introduce any torque on the wire. \u003c\/li\u003e\n\u003cli\u003eConcaved lower beak helps bend and guide the wire while bending and forming helixes. \u003c\/li\u003e\n\u003cli\u003eSerrations are machined on the concaved portion to ensure a firm grip and eliminate slippage during wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eA closing groove is placed at the rear portion of the tip which helps when closing vertical loops.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478645981404,"sku":"043","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/043-1.jpg?v=1769038456"},{"product_id":"tweed-loop-forming-plier-kim-design-with-cutter","title":"Tweed Loop Forming Plier – Kim Design with Cutter","description":"\u003cp\u003eThis Tweed plier is uniquely designed for the Kim Technique. Manufactured with three different size barrels at the tip. The lower portion of the beak is flat and machined parallel with the barrels allowing for proper bends for the technique. In addition, the lower beak is serrated (a series of grooves) to help eliminate slippage. Towards the rear of the beak, we also placed a built in wire cutter for convenience.     \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront barrel .045\", middle barrel .060\", and rear barrel .075\" diameter. \u003c\/li\u003e\n\u003cli\u003eThe lower beak is flat and machined parallel with the barrels. \u003c\/li\u003e\n\u003cli\u003eRecommended to form round and rectangular wire up to .025\" diameter and .021\" x .025\".\u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built in cutter capable of cutting all arch wire up to .025\" diameter and .021\" x .025\" (Round and rectangular).\u003c\/li\u003e\n\u003cli\u003eSerrations (grooves) are machined on the flat portion of the beak to ensure a firm grip and eliminate slippage during wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478646145244,"sku":"043-CK","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/043-CK-1.jpg?v=1769032475"},{"product_id":"tweed-loop-forming-plier-2-barrel","title":"Tweed Loop Forming Plier (2-Barrel)","description":"\u003cp\u003eThis Tweed loop forming plier is manufactured with 2-Barrels at the tip that fall into concave lower beak. The lower concave beak is serrated to ensure a non-slip grip when forming helixes and adjustments on an arch wire. Two different size barrels are machined at the tip help eliminate torque of an arch wire during use.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront barrel .045\" diameter, middle barrel .060\" diameter. \u003c\/li\u003e\n\u003cli\u003eConcaved lower beak helps bend and guide the wire during wire bending and forming helixes. \u003c\/li\u003e\n\u003cli\u003eSerrations are machined on the concaved portion to ensure a firm grip and eliminate slippage during wire bending. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .025\". \u003c\/li\u003e\n\u003cli\u003eA closing groove is placed at the rear portion of the tip which helps when closing vertical loops.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003cli\u003eOptional cutter can be added item catalog # 042-C Tweed loop forming plier 2-barrel with cutter please call or e-mail. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478646505692,"sku":"042","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/042-1.jpg?v=1769038460"},{"product_id":"optical-plier","title":"Optical Plier","description":"\u003cp\u003eBeaks are manufactured with a fine tapered round and concave beak. Excellent for bending of round and rectangular wire, affording firm grip, without nicking wire. Can be used for loop tip back and gable bends. Due to its design at the tip, it can also be used very similar to a fine nose three prong. Both beaks are manufactured with hardened steel inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth beaks measure 5\/8\" in length and round beak is tapered the whole length of the beak. \u003c\/li\u003e\n\u003cli\u003eThe lower beak is concaved (grooved) and allows the round beak to position into the groove. \u003c\/li\u003e\n\u003cli\u003eCan be utilized for both bending and forming loops outside the mouth and also intraoral adjustments on an arch wire. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478646538460,"sku":"044","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/044-1.jpg?v=1769038463"},{"product_id":"optical-plier-modified-single-barrel","title":"Optical Plier Modified (Single Barrel)","description":"\u003cp\u003eExcellent multipurpose instrument. Due to its design, it can be utilized as a small fine beak three prong plier, optical plier and a Tweed loop forming plier. The single round barrel machined at the tip forms helixes and bends without introducing torque to the archwire. It can also be used for making intraoral adjustments in the mouth. Both beaks are manufactured with hardened inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne single barrel is milled at the tip of the round side of the beak and measures .030\" diameter.\u003c\/li\u003e\n\u003cli\u003eThe barrel works for bending helixes and loops without introducing torque to an archwire. \u003c\/li\u003e\n\u003cli\u003eThe round beak measures 5\/8\" long and round the whole length of the beak. \u003c\/li\u003e\n\u003cli\u003eBeing a single barrel, it adds to the strength of the tip and can be used for intraoral adjustments.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eThe lower beak is concaved (grooved) and allows the round beak to position into the groove. \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478646603996,"sku":"044-G","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/044-G-1.jpg?v=1769032488"},{"product_id":"tweed-loop-forming-plier-tweed-course-design","title":"Tweed Loop Forming Plier – (Tweed Course Design)","description":"\u003cp\u003eThis custom design Tweed Loop Forming Plier is used by the Tweed Foundation group for many years. In most cases it replaces the traditional 3-barrel Tweed loop forming plier. The round beak is extremely tapered to a fine point. The lower beak is concaved along with a thin parallel edge for tight bends and helixes.  Both beaks are manufactured with hardened steel inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis instrument is a custom design that is presently used by the Tweed Foundation. \u003c\/li\u003e\n\u003cli\u003eThe round beak is extremely tapered; the radius measures .025\" in diameter at the tip. \u003c\/li\u003e\n\u003cli\u003eThe lower beak is concaved (grooved allowing the round beak to position and fit into the groove). \u003c\/li\u003e\n\u003cli\u003eThe sides of the concaved beaks are parallel which help form and create tight bends. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the beak to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round wire up to .025\" and rectangular wire up to .021\" X .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478646767836,"sku":"044-W","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/044-W-1_bb860225-8bf4-48c3-bfe2-98904598a27f.jpg?v=1769032492"},{"product_id":"auxiliary-spring-forming-plier","title":"Auxiliary Spring Forming Plier","description":"\u003cp\u003eThe unique design of this plier is for forming Broussard® auxiliary spring components on .014\", .016\" or .018\" round wire, with minimum operator time and effort. The auxiliary spring bending plier fabricates auxiliary spring components used in the Broussard® \"two-force technique\" with accuracy and uniformity. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo round barrels are machined at the tip, the first barrel measures .050\" in diameter and the second barrel measures .065\" in diameter. \u003c\/li\u003e\n\u003cli\u003eThe lower beak is flat and parallel with the barrels allowing for a proper bend back for T-loop and forming auxiliary springs.\u003c\/li\u003e\n\u003cli\u003eThree grooves are placed in the middle of the beak and grooved for .014\", .016\" and .018\" wire.\u003c\/li\u003e\n\u003cli\u003e Hardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .022\" \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478646833372,"sku":"050","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/050-1.jpg?v=1769038467"},{"product_id":"jarabak-plier","title":"Jarabak Plier","description":"\u003cp\u003eThis loop former is manufactured with a fine tapered round beak along with a flat serrated square beak on the other side very similar to a light wire forming plier. Jarabak instruments are to be used chair side for bending and forming light wire up to .025\" diameter. Three precision grooves are placed on the flat portion of the beak to form different size vertical and closing loops. Towards the tip of flat beak there are fine serrations (series of grooves) ensuring a firm grip.   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe beak measures 7\/8\" long with a tapered round bending surface that is ¼\".\u003c\/li\u003e\n\u003cli\u003eThe longest design of all Orthopli's light wire forming pliers, this Jarabak is capable of cinching, guiding and intraoral wire adjustments. \u003c\/li\u003e\n\u003cli\u003eThe flat beak is serrated at the tip to ensure a positive firm grip eliminating slippage during usage. \u003c\/li\u003e\n\u003cli\u003eThree grooves are placed at the rear of the instrument to create various size bends and closing loops. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .028\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647095516,"sku":"052","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/052-1.jpg?v=1769038471"},{"product_id":"jarabak-plier-with-cutter","title":"Jarabak Plier with Cutter","description":"\u003cp\u003eThis long nose Jarabak plier is designed to bend and form both round and rectangular wire up to .025\" diameter and .021\" x .028\". One beak is a fine tapered round tip along with a flat serrated square beak on the opposite side. Uniquely placed at the rear of the tip is a built in cutter allowing the operator to form and cut the arch wire with one instrument. Serrations (series of grooves) are added at the tip of the instrument to help eliminate slippage. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe beak measures 7\/8\" long with a tapered round bending surface that is ¼\".\u003c\/li\u003e\n\u003cli\u003eTowards the rear of the tip is a built in cutter capable of cutting all arch wire up to .025\" diameter and .021\" x .028\"round and rectangular wire.\u003c\/li\u003e\n\u003cli\u003eThe longest design of all Orthopli's light wire forming pliers, this Jarabak is capable cinching, guiding and intraoral wire adjustments. \u003c\/li\u003e\n\u003cli\u003eThe flat beak is serrated at the tip to ensure a positive firm grip eliminating slippage during usage. \u003c\/li\u003e\n\u003cli\u003eTwo grooves are placed in the middle of the instrument to create various size bends and closing loops. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .028\".\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647128284,"sku":"052-C","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/052-C-1.jpg?v=1769032505"},{"product_id":"arch-contouring-forming-plier-standard","title":"Arch Contouring \u0026 Forming Plier (standard)","description":"\u003cp\u003eDesigned for forming and contouring round and rectangular archwire without torque. The arch is approx. 7.5 mm wide and is capable of bending and contouring wire from .012\" up to .040\". The arch shape is determined by the operator and the amount of pressure that is applied when forming the arch. Most important is all edges are beveled and smooth which will eliminate nicking the wire during use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe outside edges are beveled creating a smooth arch without nicking the wire. \u003c\/li\u003e\n\u003cli\u003eOne side of the beak contains an upper arch that fits into a concave pocket which creates the arch. \u003c\/li\u003e\n\u003cli\u003eCapable of contouring an arch on round and rectangular wire ranging from .012\" to .040\". \u003c\/li\u003e\n\u003cli\u003eThe plier measures 7.5mm wide along with a smooth inside working surface. \u003c\/li\u003e\n\u003cli\u003eArch shape can be larger or smaller and this is determined by the amount of pressure applied during operation. \u003c\/li\u003e\n\u003cli\u003eSmooth inside beaks help eliminate torque in the wire when contouring the arch. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647193820,"sku":"063-P","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/063-P-1.jpg?v=1769032509"},{"product_id":"arch-contouring-forming-plier-wide-long","title":"Arch Contouring \u0026 Forming Plier (Wide Long)","description":"\u003cp\u003eUniquely designed this wide arch former is manufactured with a longer and wider beak. There is a gentle curvature on the radius of the beak and can be used to contour an arch on wire up to .036\". The wider gradual curve is excellent for introducing a reverse curve to an archwire. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe outside edges are beveled creating a smooth arch without nicking the wire. \u003c\/li\u003e\n\u003cli\u003eThe plier measures approx. 8.5 mm wide along with a smooth inside working surface.\u003c\/li\u003e\n\u003cli\u003eManufactured with a gentle curvature offers the ability to create a reverse curve in the arch wire along with contouring an arch. \u003c\/li\u003e\n\u003cli\u003eOne side if the beak contains an upper arch that fits into a concave pocket which creates the arch. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .036\" diameter. \u003c\/li\u003e\n\u003cli\u003eArch shape can be larger or smaller and this is determined by the amount of pressure applied during operation. \u003c\/li\u003e\n\u003cli\u003eSmooth inside beaks help eliminate torque in the wire when contouring the arch. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647292124,"sku":"063-PL","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/063-PL-1.jpg?v=1769032514"},{"product_id":"hawley-retainer-forming-plier","title":"Hawley Retainer Forming Plier","description":"\u003cp\u003eThis multipurpose lab instrument is actually three pliers in one for forming retainers. The front barrel is used just like a bird beak; the second barrel will give large loops keeping retainers looking uniform. Toward the rear of the beak we have placed an arch-contouring section to contour and make an arch.  When needing to produce retainers, this is an excellent choice for it will keep all wire on the same plain and loops uniform.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe front barrel measures 1.75 mm (.070\") diameter and is capable of bending lab wire up to .036\" diameter. \u003c\/li\u003e\n\u003cli\u003eThe front barrel creates a tight helix, simple stops and eyehooks for the acrylic. \u003c\/li\u003e\n\u003cli\u003eThe second barrel measures 3.75 mm (.150\") diameter and creates uniform loops and keeps them on the same plain. \u003c\/li\u003e\n\u003cli\u003eToward the rear of the beak is an arch contouring section that can create or reshape any retainer arch.\u003c\/li\u003e\n\u003cli\u003eThis instrument is three pliers in one eliminating the need to keep switching pliers during use.\u003c\/li\u003e\n\u003cli\u003eRecommended on lab wire up to .036\" diameter. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647521500,"sku":"065","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/065-1_0ed72403-0f19-492f-9fb4-ba23d17c9165.jpg?v=1769038474"},{"product_id":"light-wire-plier-2-round-beaks","title":"Light Wire Plier 2-Round Beaks","description":"\u003cp\u003eThis unique design allows the operator to form loops and helixes along with wire adjustments on either beak.  Both beaks are identical in design. Beaks are manufactured with fine tapered round beaks measuring .025\" diameter at the tip. The rear section of the beak is flat and can be used for bending and closing loops.  Beaks are manufactured with hardened steel inserts to help eliminate slippage during use which also creates a stronger longer lasting instrument.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoth beaks are rounded and tapered measuring .025\" diameter at the tip. \u003c\/li\u003e\n\u003cli\u003eTowards the rear of the instrument is a flat section for forming and closing loops. \u003c\/li\u003e\n\u003cli\u003eHaving both beaks rounded helps eliminate sharp corners when bending or forming helixes.\u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .025\".\u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647718108,"sku":"031","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/031-1.jpg?v=1769038478"},{"product_id":"inter-maxillary-hook-forming-plier","title":"Inter Maxillary Hook Forming Plier","description":"\u003cp\u003eDesigned to help form uniform T-loops, boot loops and tight helixes. Looking straight down at the tip one beak has a small round beak measuring .025\" diameter and opposing side is rectangular with round edges measuring .080\" wide. The rectangular section being wider than the round section helps achieve the various loops.   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForm T-loops, boot loops and tight helixes. \u003c\/li\u003e\n\u003cli\u003eThe round beak falls at the center of the rectangular beak to achieve the various loops.\u003c\/li\u003e\n\u003cli\u003eThe round beak measures .025\" diameter at the tip.\u003c\/li\u003e\n\u003cli\u003eThe flat rectangular beak measures .025\" x .080\" at the tip. \u003c\/li\u003e\n\u003cli\u003eHardened steel inserted tips are soldered at the tip to increase the strength of the instrument and help eliminate slippage when forming or bending wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for round and rectangular wire up to .025\" diameter and .021\" x .025\". \u003c\/li\u003e\n\u003cli\u003eAll stainless steel box joint construction accommodated by a hardened steel inserted tip for strength. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647750876,"sku":"051","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/051-1.jpg?v=1769038481"},{"product_id":"ligature-cutter-standard-handle","title":"Ligature Cutter (Standard Handle)","description":"\u003cp\u003eThis is Orthopli's most popular ligature cutter. Due to the standard size handle (5 1\/8\") it is capable of cutting all dead soft ligature wires and ligature twist ties at the tip. Beaks are machined with a diamond wheel to achieve tip alignment. To increase the life of the instrument only use the top ½ of the cutting edge for ligature wire only.  Both beaks are manufactured with hardened steel inserts for strength and extends the sharpness of the cutting edge. \u003c\/p\u003e\u003cp\u003e             \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured with a standard handle measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are machined with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003cli\u003eIt is recommended to use this instrument for the cutting of ligature wire only. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478647783644,"sku":"020","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-4_4d1b5385-68c0-41e9-9cff-f7bbb7e3047b.jpg?v=1769038486"},{"product_id":"ligature-cutter-standard-handle-15deg-angle","title":"Ligature Cutter (Standard Handle)(15° Angle)","description":"\u003cp\u003eUniquely designed Orthopli has incorporated a 15° offset angled beak on this standard handle (5 1\/8\") ligature cutter. The angled beaks offer increased visibility during use in the anterior and posterior region. It is capable of cutting all dead soft ligature wire and ligature wire twist. To increase the life of the instruments only use the top ½ of the cutting edge for ligature wire only. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured on a standard handle measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are machined with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eFrom a side view the beak is angled at 15° offset and the shape of the beak is tapered to its finest point. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eIt is recommended to use this instrument for the cutting of ligature wire only. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478648144092,"sku":"020-A","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-A-4.jpg?v=1769032537"},{"product_id":"ligature-cutter-small-handle","title":"Ligature Cutter (Small Handle)","description":"\u003cp\u003eOrthopli's small handle ligature cutter is designed for those doctors and staff that prefer the feel and comfort of a smaller plier. This is the smallest ligature cutter manufactured by Orthopli Corporation. This ligature cutter is capable of cutting all dead soft ligature wire and ligature ties. With the smaller design it creates easy access in tighter areas. Both beaks are manufactured with hardened steel inserts for strength and extends the sharpness of the cutting edge. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured on a small handle measuring 4 1\/4\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eThis is the smallest ligature cutter manufactured by Orthopli.\u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eThis smaller ligature cutter provides easier access in tighter areas. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649290972,"sku":"020-S","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-M-4.jpg?v=1769032543"},{"product_id":"ligature-cutter-small-handle-15deg-angle","title":"Ligature Cutter (Small Handle) (15° angle)","description":"\u003cp\u003eThis smaller handle ligature cutter is for those doctors and staff that prefer the feel and comfort of a smaller size plier forging. Uniquely designed Orthopli has incorporated a 15° offset angled beak on this small handle ligature cutter. The angled beaks offer increased visibility during use in the anterior and posterior region. It is capable of cutting all dead soft ligature wire and ligature ties at the tip. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured on a small handle measuring 4 1\/4\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge.\u003c\/li\u003e\n\u003cli\u003eThe beak is offset at a 15° angle creating increased visibility during use. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eSmall handle instruments are a matter of preference for the operator. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are 15° offset and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649356508,"sku":"020-SA","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-SA-2.jpg?v=1769043739"},{"product_id":"ligature-cutter-medium-handle","title":"Ligature Cutter (Medium Handle)","description":"\u003cp\u003eThe medium handle ligature cutter is the newest design forging and is growing in popularity. The instrument is slightly smaller than our standard handle and manufactured with a small head not feeling bulky or large. The tip is capable of cutting all dead soft ligature wire and twist ties. Both beaks are manufactured with hardened steel inserts for strength and will extend the sharpness of the cutting edge. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured on a medium handle measuring 4 ¾\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge.\u003c\/li\u003e\n\u003cli\u003e Beaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eMedium handle ligature cutters are growing in popularity the size is slightly smaller and thinner than our standard handle. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649389276,"sku":"020-M","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-M-4_6430183f-2e3a-4632-b911-58349acb9962.jpg?v=1769032552"},{"product_id":"ligature-cutter-slim-long-handle","title":"Ligature Cutter (Slim Long Handle)","description":"\u003cp\u003eThis slim long handle ligature cutter is extremely comfortable in the operator's hands. Along with the advantage of the slim long handle we also hand crafted a smaller head that is capable of cutting all dead soft ligature wire and ligature ties at the tip. The slim long handle keeps the operator's hand away from the patient's mouth when cutting offering excellent visibility. Both beaks are manufactured with hardened steel inserts for strength and extends the sharpness of the cutting edge. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned with a slim long handle measuring 5 3\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eSlim long handles are not bulky and offer excellent access and visibility during use. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649422044,"sku":"020-SL","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-M-4_04a11d0c-5c0e-46b4-82ef-1899f78ba55f.jpg?v=1769032557"},{"product_id":"ligature-cutter-lap-joint-straight","title":"Ligature Cutter (Lap Joint) Straight","description":"\u003cp\u003eManufactured on a lap joint forging and measures approximately ½\" shorter than the traditional Orthopli Box joint. The joint operates without washers or shims creating a smooth operation during use. Designed to cut all dead soft ligature wire and ligature twist ties at the tip. Beaks are machined with a diamond wheel to achieve tip alignment. Both beaks are manufactured with hardened steel inserts for strength and extends the sharpness of the cutting edge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured on a lap joint forging without washers, shims, or screws to allow a smooth operation. \u003c\/li\u003e\n\u003cli\u003eLap Joint instruments measure approximately 1\/2\" shorter than the traditional Orthopli box joint. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649454812,"sku":"0L20","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/0L20-2.jpg?v=1769032561"},{"product_id":"hard-wire-cutter-standard-handle","title":"Hard Wire Cutter (Standard Handle)","description":"\u003cp\u003eOrthopli's hard wire cutter is designed to cut round and rectangular arch wire chair side. The instrument can also be utilized interiorly and is capable of cutting all arch wire up to .025\" Diameter and .021\" x .025\". Specially designed finely tapered tips insure accessibility to all interproximal areas. Due to its size, it can also be used occasionally for the debonding of brackets.  \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned on a standard handle size measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting round and rectangular arch wire up to .025\" and .021\" x .025\" both chair side and interiorly. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003cli\u003eDue to the size of the standard handle the operator can use this Hard Wire cutter for the occasional debonding of brackets. \u003c\/li\u003e\n\u003cli\u003eExtend the sharpness of the cutting edge by cutting at the rear of the cutting edge where most of the strength is placed. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649716956,"sku":"020-H","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-4_42f815ac-598b-4c54-a8ed-d456a50ca3fc.jpg?v=1769038494"},{"product_id":"hard-wire-cutter-standard-handle-15deg-angle","title":"Hard Wire Cutter (Standard Handle) (15° Angle)","description":"\u003cp\u003eThe tip of this hard wire cutter is manufactured with a 15° offset angle at the beak. This angle is the preference of the operator. The 15° offset in some cases offers easy access in tight spaces along with increased visibility during use. This hard wire cutter can be used chair side and interiorly. The cutting edge is capable of cutting round and rectangular arch wire up to .022\"diameter and .021\" x .025\". Due to its size, it can also be used occasionally for the debanding of brackets.   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned on a standard handle measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting round and rectangular arch wire up to .022\"Diameter  and .021\" x .025\" both chair side and interiorly. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are manufactured at a 15° offset angle to their finest point offering easy anterior and posterior cutting. \u003c\/li\u003e\n\u003cli\u003eDue to the size of the standard handle the operator can use this Hard Wire cutter for the occasional debonding of brackets. \u003c\/li\u003e\n\u003cli\u003eExtend the sharpness of the cutting edge by cutting at the rear of the cutting edge where most of the strength is placed. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649749724,"sku":"020-HA","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-A-4_7178134a-34c6-44f0-a5cc-6c5a009999cc.jpg?v=1769032571"},{"product_id":"ligature-cutter-extended-tip","title":"Ligature Cutter (Extended Tip)","description":"\u003cp\u003eUniquely designed this extended beak ligature cutter is one of Orthopli's customized cutters. The extended beak creates a thin flat cutting blade capable of cutting all dead soft ligature wires and ligature twist ties at the tip. This particular design will increase visibility during use and help create access in an area where space is limited. Both beaks are manufactured with hardened steel inserts for strength and extends the sharpness of the cutting edge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufactured on a standard handle measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eFlat extended beak increases visibility during use and help access an area where space is limited. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are machined with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eIt is recommended to use this instrument for cutting ligature wire only. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649782492,"sku":"020-L","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-L-4.jpg?v=1769032576"},{"product_id":"ligature-cutter-custom-small-head-standard-handle","title":"Ligature Cutter (Custom Small Head) \n(Standard Handle)","description":"\u003cp\u003eManufactured on a standard handle, Orthopli has incorporated a custom small head ligature cutter toward the beak. This instrument is the preference of the operator. The beak is grounded down to incorporate a small head ligature cutter offering good visibility during use. Cuts all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned with a standard handle size measuring 5\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eManufactured with a small head on a standard handle.\u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are straight and tapered to their finest point offering easy access for anterior and posterior cutting. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649848028,"sku":"020-SM","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/020-SM-5.jpg?v=1769032581"},{"product_id":"angled-ligature-cutter-45deg-angled-tip","title":"Angled Ligature Cutter (45° angled tip)","description":"\u003cp\u003eThis 45° angled ligature cutter is an instrument that some doctors feel is slimmer and creates easier access when cutting in the posterior and anterior region. The 45° angle is capable of cutting in difficult tight areas. Capable of cutting all dead soft ligature wire and ligature twist ties. Both beaks are manufactured with hardened steel inserts for strength and extends the sharpness of the cutting edge. \u003c\/p\u003e\u003cp\u003e             \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned with a standard handle size measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eTips are offset at a 45° angle creating more visibility during use. \u003c\/li\u003e\n\u003cli\u003e45° angle tip creates a slimmer beak able to cut in tight difficult areas both posterior and anterior. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649913564,"sku":"024","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/024-4.jpg?v=1769038498"},{"product_id":"lingual-angled-ligature-cutter-45deg-angled-tip-slim-long-handle","title":"Lingual Angled Ligature Cutter \n(45° angled tip)(Slim Long Handle)","description":"\u003cp\u003eCutting ligature wire in the lingual area can easily be achieved with this custom designed ligature cutter. The beaks are ground down to their thinnest point for reach and cutting in difficult and tight areas. The 45° angled tip along with the slim long handle offers easy access to reach and cut in both the anterior and posterior lingual regions. Slim long handle creates more visibility during use.   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned with a slim long handle measuring 5 3\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eSlim long handle helps increase mobility of use in the lingual region along with increased visibility. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eTips are offset at a 45° angle creating more visibility during use. \u003c\/li\u003e\n\u003cli\u003e45° angle tip creates a slimmer beak able to cut in tight difficult areas both posterior and anterior.\u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649946332,"sku":"024-SL","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/024-SL-3.jpg?v=1769032591"},{"product_id":"ligature-cutter-style-jehm-150","title":"Ligature Cutter (Style Jehm 150)","description":"\u003cp\u003eThis Jehm 150 shape tip ligature cutter design is a duplicate shape of an older design ligature cutter. Ligature cutter shapes have changed throughout the years, but this original shape is still available. It is capable of cutting all dead soft ligature wires and ligature twists at the tip.   \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned with a standard handle size measuring 5 1\/8\" in length along with a stainless steel forging. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel inserted tip which increases the strength and extends the sharpness of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eThe shape of the tip duplicates the Jehm 150 design (Original shape ligature cutter).\u003c\/li\u003e\n\u003cli\u003eCapable of cutting all dead soft ligature wire along with ligature twist ties at the tip. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge is hand crafted with a specially designed double anvil cutting edge. \u003c\/li\u003e\n\u003cli\u003eBeaks are tipped with a diamond wheel to achieve tip alignment to receive the closest cut. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478649979100,"sku":"025","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/025-2.jpg?v=1769038502"},{"product_id":"bernard-plier-with-cutter-5-1-8-long-heavy-wire","title":"Bernard Plier with Cutter (5 1\/8” Long) (Heavy Wire)","description":"\u003cul\u003e\n\u003cli\u003eMulti use instrument that can be used for retainer, head gear adjustments and excellent for lab use. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting and bending headgear and retainer wire up to .080\". \u003c\/li\u003e\n\u003cli\u003eBeaks open and close parallel to eliminate slippage during bending. \u003c\/li\u003e\n\u003cli\u003eInside jaws are serrated to ensure a firm grip. \u003c\/li\u003e\n\u003cli\u003eSide cutter will cut parallel making it easier to cut retainer and headgear wire. \u003c\/li\u003e\n\u003cli\u003eThis plated instrument is capable of being Auto-Claved, Cold Sterilized and Dry heat sterilized.\u003c\/li\u003e\n\u003cli\u003e Available in a long handle design catalog #O23-L. Please call Orthopli at 1-800-237-337 for more information. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650175708,"sku":"023","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/023-1.jpg?v=1769038506"},{"product_id":"diagonal-hard-wire-cutter","title":"Diagonal Hard Wire Cutter","description":"\u003cul\u003e\n\u003cli\u003eCapable of cutting all types and sizes of Orthodontic wire up to .080\" diameter. \u003c\/li\u003e\n\u003cli\u003eIdeally used in a lab for cutting retainer wire and headgear. \u003c\/li\u003e\n\u003cli\u003eThe compound spring action offers ease and little pressure when cutting heavy wire. \u003c\/li\u003e\n\u003cli\u003ePlastic grips are molded to the handles for comfort to the operator. \u003c\/li\u003e\n\u003cli\u003eBoth edges of the cutting edge are beveled sharp creating an easier cut. \u003c\/li\u003e\n\u003cli\u003eThis universal cutter is a popular choice and is used in most dental and orthodontic labs. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650208476,"sku":"028","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/028-2.jpg?v=1769038510"},{"product_id":"heavy-side-cutter-vanadium-chrome","title":"Heavy Side Cutter (Vanadium Chrome)","description":"\u003cul\u003e\n\u003cli\u003eThe uniqueness to this instrument is that it resembles and has the appearance of a standard orthodontic plier. \u003c\/li\u003e\n\u003cli\u003eWhen used chairside is does not look like a large lab cutter and fits in most cassette trays. \u003c\/li\u003e\n\u003cli\u003eCapable of cutting retainer wire up to .040\" and all arch wire. \u003c\/li\u003e\n\u003cli\u003eRecommended for lab use and cutting of heavy wire.  \u003c\/li\u003e\n\u003cli\u003eVanadium chrome plated instrument is capable of being autoclaved, cold sterilized and dry heat sterilized. \u003c\/li\u003e\n\u003cli\u003eMeasures 5 3\/4\"in length and offers an easy cut with little effort. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650241244,"sku":"021","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/021-2.jpg?v=1769038514"},{"product_id":"flush-cut-and-hold-distal-end-cutter-standard-handle","title":"Flush Cut and Hold Distal End Cutter (Standard Handle)","description":"\u003cp\u003eOrthopli Corporation's most popular instrument sold is the Flush Distal end Cutter. Flush distal end cutters were originally patented, designed and manufactured by Orthopli Corporation. It permits the operator to cut and hold the excess arch wire flush to the buccal tube leaving no protrusions which will irritate the patient. At the same time the built in holding spring will hold the cut piece of wire preventing the wire from flying into tissue. Having an actual cutting edge, this flush distal end cutter is capable of cutting round, rectangular, twist and braided arch wire with ease up to .025\" and .021\" x .028\". Both beaks are manufactured with hardened steel inserts which increase the cutting strength and extends the sharpness of the cutting edge. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to cut and hold the excess arch wire flush to the buccal tube leaving no protrusions of arch wire that will irritate the patient. \u003c\/li\u003e\n\u003cli\u003eManufactured on an all stainless steel box joint standard handle forging measuring approximately 5\" in total length. \u003c\/li\u003e\n\u003cli\u003eBoth beaks are manufactured with a hardened steel insert which increases the strength and extends the life of the cutting edge. \u003c\/li\u003e\n\u003cli\u003eFlush distal end cutters were originally patented, manufactured and designed by Orthopli Corporation. \u003c\/li\u003e\n\u003cli\u003eThe cutting edge hits against a flat surface which reduces stress and vibration of the arch wire during cutting which provides more comfort to the patient.\u003c\/li\u003e\n\u003cli\u003eThe cutting edge is located toward the base of the tip allowing the operator to cut and hold arch wire flush to the buccal tube.\u003c\/li\u003e\n\u003cli\u003eAfter cutting the excess arch wire there will be no protrusions of wire to irritate the patient.\u003c\/li\u003e\n\u003cli\u003e Built into the instrument is a stainless steel holding spring which is located above the cutting edge and holds the cut piece of wire.\u003c\/li\u003e\n\u003cli\u003eRecommended for braided, twist, round and rectangular wire up to .025\" diameter or .021\" x .028\" rectangular. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orthopli","offers":[{"title":"Default Title","offer_id":47478650306780,"sku":"026","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/6269\/3084\/files\/026-5.jpg?v=1769045500"}],"url":"https:\/\/www.orthopli.com\/collections\/pliers.oembed","provider":"Orthopli","version":"1.0","type":"link"}